3M Tape Adhesive 12V 24V SMD 5050Dimmable Led Lighting Waterproof
RGBLed Strip IP68
What is the details of our LED Strips?
1. use high brightness Epistar LED chips with 3 groups gold wire
and lifespan over 50,000 hours
2. Double copper circuit board with good flexibility and good
conductive heat dissipation
3. Manual welding,smooth weld,reduce weld,leakage welding improve
4. Each 3 led as a group can be cut off,convenient to use
5. With more viscous and firm 3M Back stikers,easy to install
1). LED SMD flexible strip with high brightness, widely applied to
hotel,KTV entertainment place for
interior decorative lighting,etc.
2). This LED strip could be linked up to 5M ,more than 5 meters is
3). The diameter of the power cord should be based on the actual
maximum current , the product power
,cabling length(recommend no more than 5 meters),and the voltage of
4). Each 5 meters need to add to the power cord. because of the
|Item||A lamp bead two kinds of color temperature|
How to install?
1. Cut along the mark line, tear a little bit 3M tape from the
mark. If 3M tape is not peeled off a little, it will
be not easy to insert the strip into the connector.
2. Pull the black plastic lock out from the connector, insert
3. Make sure the soldering pads fully touch the conjunction metal.
4. Push the plastic lock back towards the middle in the lock
5. Do not use to much strength while pulling the plastic lock,
otherwise it can destroy the connector.
Use for indoor
Light up colorful home life ,DIY household lights for hallways,
stairs, trails ,windows.
Light up colorful life hotels decoration use,Theaters, clubs,
shopping malls, festivals and performances.
Use for outdoor
Architectural decorative lighting,Archway, canopy and bridge edge
lighting, Security lighting and
Extensively applied in Backlighting for signage letters, concealed
lighting and advertisement sign lighting.