High quality 5050 IP20 rgb dimmable color changing flexible led
strip with 3m
- Available in Cool White or Warm White, Red, Green or Blue
- Can be cut
- Come with included 3M adhesive backing for easy application
- Dimmable with LED Dimmable Driver
- Available in IP-40 (Indoor) or IP-65 (Weatherproof)
- 2 Year Warranty
- Clean the surface you intend to stick the light strip to Peel off
the backing strip off the
- adhesive tape
- Press and hold the light strip firmly against the surface
- Plug your light strip into a compatible 12V/24V DC power supply or
- Connect your power supply to a wall outlet Enjoy your beautiful LED
- Our light strips are also cuttable and connectable with extension
|Item||A lamp bead two kinds of color temperature|
How to install?
1. Cut along the mark line, tear a little bit 3M tape from the
mark. If 3M tape is not peeled off a little, it will
be not easy to insert the strip into the connector.
2. Pull the black plastic lock out from the connector, insert
3. Make sure the soldering pads fully touch the conjunction metal.
4. Push the plastic lock back towards the middle in the lock
5. Do not use to much strength while pulling the plastic lock,
otherwise it can destroy the connector.